A floor-standing drill press offers more working height and support than a benchtop model, but the right choice depends on how often you drill large stock, change materials, or need precise speed control. I rank the Powermatic PM2800B as the best overall for its 18-inch capacity and variable-speed design; the WEN 4227T stands out for its 13-amp motor and 12 speeds, while the JET JDP-20S is a strong candidate for buyers who want a 20-inch machine. The main tradeoffs are reach and power versus floor space, setup demands, and the simplicity of a smaller machine. Read on for how all nine options compare and which one best fits your shop.
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
Complete the kit
Key Takeaways
- The PM2800B balances reach and adjustability: its 18-inch capacity and variable-speed design give it a broader working range than the 13-inch options.
- Twenty-inch models serve a specific need: the JET JDP-20S and Shop Fox M1039 offer greater reach, but buyers should match that capacity to their actual work and available shop space.
- Motor power and speed range are separate considerations: the WEN 4227T pairs a 13-amp motor with 12 speeds, while the Klutch and JET J-2500 use 3/4 HP motors with 16-speed setups.
- Variable speed favors frequent material changes: ExploreHorizon and PioneerWorks offer 13-inch variable-speed designs, while fixed-speed models require choosing among preset steps.
- Capacity is not the only measure of fit: a 13-inch drill press can suit routine shop work better than a larger machine if floor space, workload, and workpiece size are modest.
| ExploreHorizon 13-Inch Variable-Speed Drill Press, 7.5A | ![]() | Best for Benchtop Flexibility | Drill type: Benchtop drill press | Motor: 7.5 A | Speed range: 288–3,084 RPM | VIEW ON AMAZON | See Our Full Breakdown |
| Powermatic PM2800B 18-Inch Floor Drill Press, 1 HP | ![]() | Best for Woodworking Setup and Guidance | Model: PM2800B | Drill type: Floor drill press | Motor power: 1 hp | VIEW ON AMAZON | See Our Full Breakdown |
| WEN 4227T 13-Amp 12-Speed Floor-Standing Drill Press | ![]() | Best for Deep Drilling and Large Workpieces | Power: 13 A, 120 V | Number of speeds: 12 | Speed range: 150–3,150 RPM | VIEW ON AMAZON | See Our Full Breakdown |
| JET JDP-20S 20-Inch Smart Floor Drill Press | ![]() | Best Premium Smart Controls | Swing: 20 in | Motor: 1.5 HP brushless direct drive | Speed range: 150–3,000 RPM | VIEW ON AMAZON | See Our Full Breakdown |
| Klutch 13-Inch Floor Drill Press, 3/4 HP, 120V, 16-Speed | ![]() | Best Value for Straightforward Floor-Standing Work | Model: J-A5816 | Motor: 3/4 hp | Voltage and amperage: 120 V; 4.6 A | VIEW ON AMAZON | See Our Full Breakdown |
| JET J-2500 15-Inch Floor Drill Press, 16-Speed, 3/4 HP | ![]() | Best for Stable, Traditional Drilling | Motor: 3/4 HP | Voltage: 115/230 V, single phase | Speeds: 16 | VIEW ON AMAZON | See Our Full Breakdown |
| Shop Fox 20-inch 12-Speed Floor Drill Press with 5/8-inch Chuck (M1039) | ![]() | Best for Large Workpieces | Motor power: 1.5 HP | Listed voltage: 120 V | Speeds: 12 | VIEW ON AMAZON | See Our Full Breakdown |
| PioneerWorks 13-inch Floor Drill Press with 7.5A Variable Speed Motor | ![]() | Best for Fine Speed Adjustment | Swing: 13 in | Motor: 7.5 A / 900 W | Voltage: 120 V | VIEW ON AMAZON | See Our Full Breakdown |
| JET JDP-17 17-Inch Floor Drill Press | ![]() | Best for Deep, Repeatable Drilling | Motor: 3/4 HP, 115 V, single phase | Speeds: 16 | Speed range: 210–3,500 RPM | VIEW ON AMAZON | See Our Full Breakdown |
| floor standing drill press | Motor | Speed range | Weight | Chuck capacity |
|---|---|---|---|---|
| ExploreHorizon 13-Inch Variabl | 7.5 A | 288–3,084 RPM | 45.9 lb | 5/8 in |
| Powermatic PM2800B 18-Inch Flo | — | — | — | — |
| WEN 4227T 13-Amp 12-Speed Floo | — | 150–3,150 RPM | 214 lb | 1/16–5/8 in |
| JET JDP-20S 20-Inch Smart Floo | 1.5 HP brushless direct drive | 150–3,000 RPM | 218 lb | — |
| Klutch 13-Inch Floor Drill Pre | 3/4 hp | — | — | 5/8 in |
| JET J-2500 15-Inch Floor Drill | 3/4 HP | — | 167 lb | — |
| Shop Fox 20-inch 12-Speed Floo | — | 210–3,300 RPM | — | 5/8 in (16 mm) |
| PioneerWorks 13-inch Floor Dri | 7.5 A / 900 W | 288–3,084 RPM | 119.2 lb | 5/8 in |
| JET JDP-17 17-Inch Floor Drill | 3/4 HP, 115 V, single phase | 210–3,500 RPM | 187 lb | — |
More Details on Our Top Picks
ExploreHorizon 13-Inch Variable-Speed Drill Press, 7.5A
The ExploreHorizon’s main distinction in this lineup is its variable-speed control in a benchtop format. Its 288–3,084 RPM range lets woodworkers and hobby metalworkers adjust speed without relying on a fixed set of steps, while the tilting table supports angled drilling. Compared with the floor-standing Klutch J-A5816, it gives up floor-level capacity and a 16-speed selection for a smaller, lighter machine with continuous speed adjustment. It is still listed at 45.9 pounds and measures 55 inches in one dimension, so “benchtop” does not mean easy to shift around or compact in every shop. I’d choose it for varied light-duty work where speed flexibility matters more than a true floor-standing frame; buyers who need a dedicated floor model should look at the Klutch or WEN instead.
Pros:- Variable speed from 288 to 3,084 RPM suits a range of drilling tasks.
- 5/8-inch chuck capacity accommodates larger bits than many light-duty benchtop models.
- Worktable tilts from 0° to 45° for angled holes.
- Includes basic hex wrenches and a key-drift.
Cons:- Benchtop design does not provide the floor-standing working height or footprint buyers may need.
- At 45.9 pounds, it is substantial to lift and reposition for a benchtop machine.
- The supplied data does not identify a laser, work light, or other alignment aid.
Best for: Woodworkers and hobby metalworkers who want variable-speed control for mixed materials and have a sturdy bench or stand available.
Not ideal for: Buyers specifically seeking a floor-standing drill press, or anyone needing a compact machine that is easy to move and store.
- Drill type:Benchtop drill press
- Motor:7.5 A
- Speed range:288–3,084 RPM
- Swing:13 in
- Chuck capacity:5/8 in
- Spindle travel:3.2 in
- Worktable:10 × 10 in; tilts 0°–45°
- Weight:45.9 lb
Our verdict“Choose the ExploreHorizon for variable-speed versatility on a bench, but pick a floor model like the Klutch if standing-height work is the priority.”
Powermatic PM2800B 18-Inch Floor Drill Press, 1 HP
The Powermatic PM2800B suits woodworkers who want variable speed without belt changes and shop aids that help with positioning. Its laser guide, adjustable LED lights, and adjustable fence make it more woodworking-focused than the WEN 4227T, which instead offers 12 fixed speeds and notably long spindle travel for deeper workpieces. The Powermatic’s table tilts up to 90 degrees, giving it more stated angle range than the WEN’s 45-degree tilt, while its 1 HP motor sits below the WEN’s 13-amp rating and the JET JDP-20S’s 1.5 HP. I’d rank it for controlled wood-shop work rather than maximum reach or heavy metal drilling. The listed chuck size and drilling capacities are 0.63 inches, and its corded design calls for a nearby power outlet.
Pros:- Variable speed adjusts from 250 to 3,000 RPM without belt changes.
- Laser guide helps indicate the drill point before starting.
- Adjustable LED work lights reduce shadows around the work area.
- Tilting cast iron table and adjustable fence support varied woodworking setups.
Cons:- Corded power requires an accessible outlet at the machine’s location.
- Listed chuck size and wood and metal drilling capacities are limited to 0.63 inches.
- Its 1 HP motor is less powerful on paper than the WEN’s 13-amp motor and JET JDP-20S’s 1.5 HP motor.
Best for: Woodworkers who value quick speed changes, clear work-area lighting, and a fence for positioning repeatable holes.
Not ideal for: Buyers who need long spindle travel for deep workpieces, a cordless machine, or a press aimed at hardened and tough metals.
- Model:PM2800B
- Drill type:Floor drill press
- Motor power:1 hp
- Voltage:115 V
- Variable speed range:250–3,000 RPM
- Maximum chuck size:0.63 in
- Table tilt:Up to 90°
- Maximum torque:360.5 in-lb
Our verdict“Pick the Powermatic for a woodworking station built around convenient speed changes and positioning aids, not for maximum drilling depth or power.”
WEN 4227T 13-Amp 12-Speed Floor-Standing Drill Press
The WEN 4227T earns its place through 4-3/4 inches of spindle travel, the longest stated travel among these five options. That reach makes it a better fit than the Klutch J-A5816, with its 3-1/4-inch stroke, for drilling deeper into thick stock; the WEN description specifically points to work such as 4×4 boards. Its 12 speeds span 150–3,150 RPM, offering a broad range, though the Powermatic PM2800B changes speed without belt adjustments. A 214-pound cast iron frame helps steady the press, but that weight and its 67-inch height demand a permanent, spacious shop location. The table tilts 45 degrees in both directions, and a laser helps locate the bit. I’d favor it when reach and a planted frame matter more than portability or fast speed changes.
Pros:- 4-3/4-inch spindle travel reaches deeper into thick workpieces than the Klutch J-A5816.
- 12 speed settings cover a wide range from 150 to 3,150 RPM.
- Cast iron construction and 214-pound weight help limit vibration.
- Tilting table and laser guide support angled and positioned drilling.
Cons:- At 214 pounds, it is difficult to move once installed.
- Its 30 × 14 × 67-inch dimensions require substantial floor and overhead clearance.
- Speed selection uses 12 settings rather than the Powermatic’s belt-free variable adjustment.
Best for: Shop owners who regularly drill deep holes in thick lumber and can dedicate floor space to a heavy, stable press.
Not ideal for: People with cramped or shared workspaces, or buyers who need a drill press they can move and reposition often.
- Power:13 A, 120 V
- Number of speeds:12
- Speed range:150–3,150 RPM
- Spindle travel:4-3/4 in
- Chuck capacity:1/16–5/8 in
- Table:14 × 14 in; tilts 45° in both directions
- Dimensions:30 × 14 × 67 in
- Weight:214 lb
Our verdict“Choose the WEN when deep reach and a heavy, steady frame matter more than mobility or belt-free speed changes.”
JET JDP-20S 20-Inch Smart Floor Drill Press
The JET JDP-20S is the most control-oriented choice here: its touchscreen recommends spindle speeds by material, tool type, and bit diameter, then stores up to 15 presets. That is a different proposition from the WEN 4227T’s 12 manual speed settings or the Powermatic PM2800B’s belt-free variable speed with simpler work aids. A 1.5 HP brushless direct-drive motor, digital depth control, and six inches of quill travel make this a capable setup for repeatable woodworking. Its large tilting and rotating cast iron table can support varied workpiece orientations, but the machine is not intended for hardened, tool, or stainless steel. At 218 pounds, it also calls for a permanent floor-mounted location; I’d skip it if mobility or broad metalworking capability matters more than smart setup tools.
Pros:- Touchscreen recommends speeds for seven materials and 22 tool types and stores up to 15 presets.
- Brushless direct-drive motor offers variable speed without belt changes.
- Digital depth control includes stop and reverse options.
- 20-inch swing and a large tilting, rotating cast iron table support varied work setups.
Cons:- Not intended for hardened steel, tool steel, or stainless steel.
- At 218 pounds, it requires a dedicated floor location and is not suited to a mobile base.
- Drill bits are sold separately.
Best for: Woodworking shops that repeat jobs across several materials and bit types and want digital speed guidance, depth control, and saved settings.
Not ideal for: Metalworkers who drill hardened, tool, or stainless steel, and shop owners who need a mobile or frequently relocated press.
- Swing:20 in
- Motor:1.5 HP brushless direct drive
- Speed range:150–3,000 RPM
- Quill travel:6 in per handle revolution
- Chuck-to-table distance:Up to 24 in
- Table:20-1/4 × 13-15/16 in; tilts 90° left and right; rotates 360°
- Touchscreen and presets:5 in; supports 7 materials and 22 tool types; stores up to 15 presets
- Weight:218 lb
Our verdict“Choose the JET JDP-20S for repeatable woodworking with digital setup aids, but not for tough-steel drilling or a movable shop layout.”
Klutch 13-Inch Floor Drill Press, 3/4 HP, 120V, 16-Speed
The Klutch J-A5816 is a straightforward floor-standing option with 16 selectable speeds and a depth lock for repeat drilling. Its 13-inch swing and 3-1/4-inch stroke suit general workshop holes, while the tilting table adds angled setups without the larger footprint and reach of the WEN 4227T. Compared with the ExploreHorizon, it brings a true floor-standing frame and more fixed speed choices, but it gives up that model’s variable-speed adjustment. Its 3/4 HP motor and stated maximum drilling capacity of one inch point to practical shop work, not an especially heavy-duty role. The 110-pound weight makes it steadier than a light benchtop press but inconvenient to relocate. I’d choose it for conventional wood and metal drilling when simple controls matter more than smart guides or long travel.
Pros:- 16 speed settings offer more selectable steps than the WEN 4227T’s 12.
- Depth lock helps repeat drilling to a set depth.
- Table tilts up to 45 degrees for angled holes.
- 5/8-inch chuck and stated wood and metal use suit general workshop tasks.
Cons:- 3-1/4-inch vertical stroke is shorter than the WEN 4227T’s 4-3/4-inch spindle travel.
- At 110 pounds, it is cumbersome to move around a shop.
- Speed selection is stepped rather than variable like the ExploreHorizon and Powermatic.
Best for: Home and small-shop users who want a conventional floor press with multiple speed steps, an angled table, and repeatable depth control.
Not ideal for: Buyers who need long spindle travel, belt-free variable speed, or a lighter press that can be moved between work areas.
- Model:J-A5816
- Motor:3/4 hp
- Voltage and amperage:120 V; 4.6 A
- Number of speeds:16
- Maximum speed:3,410 RPM
- Chuck capacity:5/8 in
- Vertical stroke:3-1/4 in
- Swing and table tilt:13 in swing; table tilts 45°
Our verdict“Pick the Klutch for a conventional, depth-lock-equipped floor press with 16 speed steps, but look to the WEN for deeper drilling reach.”
JET J-2500 15-Inch Floor Drill Press, 16-Speed, 3/4 HP
I’d shortlist the JET J-2500 for a shop that values a substantial, conventional floor press over a larger work envelope or electronic speed adjustment. Its cast iron head, ground steel column, and ball-bearing-supported quill are aimed at keeping the spindle steady, while 16 belt-selected speeds let me match rotation to different materials and bit sizes. The 3-1/8-inch stroke is useful for deeper holes, though it falls short of the JET JDP-17’s 5-inch travel. That newer JET also adds a laser, light, and depth stop, so the J-2500 is the more basic choice rather than the more feature-rich one. Its 13 mm chuck and 0.63-inch listed capacity in wood and metal limit larger-bit work, and at 167 pounds it is not easy to reposition.
Pros:- Sixteen spindle speeds provide useful choices for different materials and bit sizes.
- Cast iron head and ground steel column support a steady drilling setup.
- Four permanently lubricated ball bearings support smooth, accurate quill movement.
- 3-1/8-inch spindle stroke accommodates deeper holes than a short-travel press.
Cons:- The 13 mm maximum chuck size restricts larger-bit use.
- Listed wood and metal drilling capacities are limited to 0.63 inch.
- At 167 pounds, moving and positioning it takes planning.
Best for: Woodworkers and general-purpose shop users who want a stable, 16-speed floor press for routine drilling and deeper-than-basic holes.
Not ideal for: Buyers who need a chuck larger than 13 mm, a high listed drilling capacity, or the JDP-17’s longer travel and guidance features.
- Motor:3/4 HP
- Voltage:115/230 V, single phase
- Speeds:16
- Maximum speed:3,630 RPM
- Spindle stroke:3-1/8 in
- Maximum chuck size:13 mm
- Listed drilling capacity:0.63 in in wood and metal
- Weight:167 lb
Our verdict“Choose the J-2500 for stable, straightforward 16-speed drilling, but pick the JET JDP-17 if longer travel and built-in guidance matter more.”
Shop Fox 20-inch 12-Speed Floor Drill Press with 5/8-inch Chuck (M1039)
The Shop Fox M1039 is the lineup’s workpiece-handling pick: its 18¾ × 16¾-inch table, T-slots, and coolant channels give larger or awkward stock more support than the JET J-2500’s more conventional setup. Its 1.5 HP motor and listed 1.25-inch capacity in both wood and metal also make it better suited to demanding drilling than the J-2500’s 3/4 HP motor and 0.63-inch listed capacity. The tradeoff is a 12-speed range rather than 16 settings, and the 5/8-inch chuck still limits the shank size of bits I can fit. The supplied power-source field says “Wind Powered,” which conflicts with the listed 120 V specification; buyers should verify the electrical details before purchase. Its 70-inch height and broad table call for dedicated floor space.
Pros:- Large 18¾ × 16¾-inch table supports broad workpieces.
- T-slots and coolant channels aid workholding and metal-drilling setups.
- 1.5 HP motor and listed 1.25-inch wood and metal capacity suit heavier drilling.
- Twelve speeds span 210–3,300 RPM for a range of drilling tasks.
Cons:- Large, heavy form factor requires substantial shop space and complicates relocation.
- The 5/8-inch chuck limits compatible bit shanks.
- Product data conflicts on power source, listing both wind power and 120 V.
Best for: Fabricators and woodworking shops that routinely position broad or heavy stock and need a large, slotted table with substantial listed drilling capacity.
Not ideal for: Small-shop buyers with limited floor space, users who need easy repositioning, or anyone unwilling to verify the conflicting power-source listing.
- Motor power:1.5 HP
- Listed voltage:120 V
- Speeds:12
- Speed range:210–3,300 RPM
- Chuck capacity:5/8 in (16 mm)
- Table size:18.75 × 16.75 in
- Listed drilling capacity:1.25 in in wood and metal
- Overall height:70 in
Our verdict“Pick the M1039 when a broad work table and higher listed capacity outrank compactness, and confirm its electrical requirements before ordering.”
PioneerWorks 13-inch Floor Drill Press with 7.5A Variable Speed Motor
I’d favor the PioneerWorks 13-inch press when frequent speed changes matter more than a large table or drilling envelope. Its stated 288–3,084 RPM range with continuously variable control is designed to make speed matching less dependent on choosing among fixed steps, unlike the JET J-2500’s 16 preset speeds. The table tilts up to 45 degrees for angled work, and its 3.2-inch spindle travel is close to the J-2500’s 3-1/8 inches. This is still a 13-inch-swing machine with a 10-inch-square table, however, so it gives up the broad work support offered by the Shop Fox M1039. Listed drilling capacity is also modest at 0.63 inch in wood and 0.61 inch in metal. At 119.2 pounds, it is lighter than the two JET presses here, but still not a casual move.
Pros:- Variable speed control spans 288–3,084 RPM for adjusting to varied drilling jobs.
- Table tilts from 0 to 45 degrees for angled holes.
- 3.2-inch spindle travel supports deeper drilling than a short-travel design.
- Cast iron construction and a stated 7.5 A motor suit regular shop use.
Cons:- 10 × 10-inch table offers less support than the Shop Fox M1039’s large table.
- Listed capacity is limited to 0.63 inch in wood and 0.61 inch in metal.
- 119.2-pound weight makes frequent relocation inconvenient.
Best for: Small-shop woodworkers and metal hobbyists who regularly change materials or bit sizes and want variable speed plus an angled table.
Not ideal for: Users who need a large table, higher listed drilling capacity, or a lighter machine that can be moved often.
- Swing:13 in
- Motor:7.5 A / 900 W
- Voltage:120 V
- Speed range:288–3,084 RPM
- Chuck capacity:5/8 in
- Spindle travel:3.2 in
- Table size and tilt:10 × 10 in; 0–45°
- Listed drilling capacity:0.63 in wood; 0.61 in metal
- Weight:119.2 lb
Our verdict“Choose the PioneerWorks for speed adjustment and angled drilling in a compact work envelope, not for large stock or high-capacity holes.”
JET JDP-17 17-Inch Floor Drill Press
The JET JDP-17 earns its place for work where drilling depth and repeatability matter more than easy setup. Its 5-inch spindle travel is substantially longer than the J-2500’s 3-1/8 inches and the PioneerWorks press’s 3.2 inches, so a single quill stroke can handle deeper holes with less repositioning. The tilting cast iron table, depth stop, laser guide, and LED light give it a more guided workflow than the simpler J-2500. Sixteen speeds cover 210–3,500 RPM, while the 5/8-inch keyed chuck accepts larger shanks than the J-2500’s 13 mm chuck. This is not the large-capacity choice in the group: the Shop Fox M1039 lists a wider table and greater drilling capacity. At 187 pounds, assembly and placement take real effort, and it is not recommended for a mobile base.
Pros:- Five-inch spindle travel handles deeper holes with fewer repositioning steps.
- Laser guide, LED light, and depth stop support repeatable drilling.
- Sixteen speeds cover 210–3,500 RPM.
- Tilting table with T-slots and through-slots offers flexible workholding.
Cons:- At 187 pounds, assembly and placement are difficult; lifting the head requires two people.
- Not recommended for use on a mobile base.
- Drill bits and floor lag screws are sold separately.
Best for: Dedicated-shop users who drill deep or repeated holes and value long spindle travel, a depth stop, and built-in work lighting.
Not ideal for: Buyers who need to move their press often, want the broad table and capacity of the Shop Fox M1039, or prefer a simpler, lighter machine.
- Motor:3/4 HP, 115 V, single phase
- Speeds:16
- Speed range:210–3,500 RPM
- Spindle travel:5 in
- Chuck:5/8-inch keyed
- Table dimensions and tilt:14 × 19 in; 90° left and right
- Swing:16-7/8 in
- Weight:187 lb
- Certification and warranty:CSA; 5 years (2 years for commercial or industrial use)
Our verdict“Choose the JDP-17 for deep, repeatable drilling in a fixed shop, but favor the Shop Fox M1039 for a larger table and higher listed capacity.”

How We Picked
I compared the nine machines around the decisions that shape a floor-standing drill press purchase: throat capacity, motor rating, speed control, and the likely scale of work. Capacity indicates how far the spindle can reach across a workpiece; speed options affect how easily a buyer can match the machine to different materials and bit sizes. I also considered whether a model’s feature set suits regular precision work or a simpler, occasional-use shop.
The ranking favors a useful balance of working range and adjustability over maximum size alone. That puts the Powermatic PM2800B first as a broad-use choice, while the 20-inch JET and Shop Fox models are better matched to buyers who need extra reach. The 13-inch models rank as more space-conscious alternatives, with differences in motor rating and speed setup shaping their roles. Product names and stated specifications guide this comparison; buyers should check current manufacturer details for configuration and setup requirements before purchase.
Factors to Consider When Choosing Floor Standing Drill Press
Choosing a floor-standing drill press is less about buying the largest machine and more about matching its working envelope and controls to the jobs you repeat. I would start with the workpieces you drill now, then account for the materials and bit sizes you may add later.
Match Throat Capacity to Your Workpieces
A drill press’s nominal size is tied to its throat capacity, which determines how far the spindle can reach from the column. Measure the distance from the edge of your typical workpiece to the holes you need to make; a part that is too wide for the throat may not fit under the spindle at the required location. Extra capacity is useful for wide panels and larger fabrication work, but it does not automatically improve accuracy on small parts. Larger machines can also take up more floor space and may demand more effort to position and set up. Avoid choosing by the biggest number alone; compare reach against the largest jobs you genuinely expect to drill.
Choose Speed Control for Your Materials and Routine
Drilling speed depends on material, bit diameter, and bit type, so a press with more speed choices can reduce the compromises between jobs. Variable-speed control can make frequent changes easier, while a multi-speed machine gives you defined settings but may involve more setup when switching ranges. Neither approach removes the need to choose an appropriate speed for the task. Buyers who work mostly with a narrow range of materials and bit sizes may not benefit much from extra speed flexibility. Before paying for a feature, consider how often you change setups and whether you will use the available range.
Read Motor Ratings Alongside the Workload
Motor ratings help describe a machine, but they do not tell the whole story about how it will handle every drilling task. A larger bit, harder material, or sustained workload can place different demands on a press than occasional holes in softer stock. Compare motor ratings within the intended use rather than assuming a higher figure alone guarantees the better fit. Also check the electrical requirements and confirm that your workshop circuit and outlet suit the model. If your work is occasional and modest in scale, a more powerful machine may add cost and setup demands without changing your results much.
Plan for Floor Space, Height, and Installation
A floor-standing drill press needs room not just for its base, but also for the table, workpiece, and any material extending beyond the table edges. Check ceiling height and access routes before selecting a tall machine, especially if the press will need to pass through a doorway or be moved into a basement shop. Think about where long stock will rest and whether you can still reach the controls comfortably. Larger-capacity models can be awkward in compact workshops even when their drilling range looks attractive on paper. Marking out the machine’s footprint and working area can prevent a costly fit problem after delivery.
Budget for Setup, Workholding, and Maintenance
The machine is only one part of a reliable drilling setup. A stable mounting surface, suitable clamps, accurate layout tools, and properly matched bits all help keep work secure and holes consistent. Buyers sometimes overlook the time and space needed to assemble and align a heavier press, or assume a drill press replaces safe workholding; it does not. Check the manual for belt, chuck, lubrication, and alignment requirements, then consider whether those tasks fit your comfort level. A simpler model can be a better purchase than a feature-rich one if it is easier to maintain and more likely to be set up correctly.
Frequently Asked Questions
Is an 18-inch drill press enough, or should I choose a 20-inch model?
Choose by the largest workpiece and hole position you need to reach, not by capacity as a status measure. The PM2800B’s 18-inch size may suit many general shop tasks, while the JET JDP-20S and Shop Fox M1039 offer more reach for wider work. That extra capacity matters only when your parts need it; it does not automatically make routine drilling more accurate. Measure representative workpieces and include clearance for clamping and material movement. If your projects rarely use the added reach, a smaller press may be easier to place and live with.
Should I choose variable speed or a drill press with multiple fixed speeds?
Variable speed is appealing when you change materials and bit sizes often, since it can simplify adjustments between tasks. Fixed-speed models provide a set of defined options and may suit a workshop with repeatable drilling jobs. Compare the actual speed range and adjustment method in the manufacturer’s specifications; the label alone does not tell you how convenient the change will be. Also weigh adjustment time against how often you switch settings. For occasional drilling in a consistent material, a well-matched fixed-speed machine may be all you need.
Do I need a 13-amp motor for home workshop projects?
Not necessarily. The WEN 4227T is the listed 13-amp option, while several other machines use different motor ratings, including 3/4 HP models. The right choice depends on material, bit size, workload, and the machine’s full specifications rather than one rating by itself. Confirm that your workshop’s electrical supply meets the manufacturer’s requirements before buying. If you drill intermittently in common stock, prioritizing capacity, control, and fit may matter more than selecting the largest motor figure.
Will a floor-standing drill press work in a small garage shop?
It can, but the footprint is only part of the space calculation. You also need room to position stock, clamp it, adjust the table, and reach the controls without blocking other work. A 13-inch option such as the ExploreHorizon or PioneerWorks may be easier to accommodate than a 20-inch machine, though you should verify each unit’s dimensions before purchase. Leave a clear working zone around the press and consider how long pieces will extend beyond the table. If floor space is tight, compare that setup with a benchtop press before committing to a standing model.
Which features should a beginner prioritize over maximum capacity?
A beginner is usually better served by a machine that fits the shop, has an understandable speed-setting process, and can securely handle the workpieces they expect to drill. Extra capacity can be useful later, but it may also bring a larger footprint and more demanding setup. Look for clear manufacturer instructions on assembly, adjustment, and maintenance, and budget for clamps and suitable bits. The 13-inch models in this lineup provide a smaller-capacity path, while the larger machines make sense when projects already call for more reach. Choose for the work you can describe, rather than paying for capacity you may never use.
Conclusion
For the broadest mix of reach and speed flexibility, I recommend the Powermatic PM2800B as best overall. The WEN 4227T is my value-oriented pick for buyers drawn to its 13-amp motor and 12-speed setup, while the JET JDP-20S is the premium-scale choice for work that calls for 20-inch capacity. Beginners with routine projects and limited room can start by comparing the 13-inch ExploreHorizon and PioneerWorks models, checking their full specifications and support details before deciding. For wide workpieces, consider the Shop Fox M1039 or JET JDP-20S; for a 17-inch size, look at the JET JDP-17. Match the machine to your work envelope, speed needs, and shop layout, and skip extra capacity unless your projects will use it.
Evergreen bestsellers Picks

Vitamix 5-Speed Immersion Blender, 625-Watt, Stainless Steel/Black

KitchenAid 5.5-Quart Bowl-Lift Stand Mixer, Porcelain White

Samsung 65-Inch Q8F QLED 4K UHD Smart TV (2025)
As an affiliate, we earn on qualifying purchases.












