A two-stage air compressor can support demanding shop work, but these four picks serve very different scales of operation. I rank the Ingersoll Rand 2475N7.5 first for its 24 CFM output and 80-gallon receiver, while the Ingersoll Rand 2340L5-V offers a more manageable 5 HP, 60-gallon setup for serious workshop use. For a quieter, lower-output shop compressor, the Campbell Hausfeld 60-gallon model is the more approachable fit. The HPDAVV 30 HP rotary screw is in a separate industrial class, with 140 CFM but a demanding 460V three-phase installation.
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
The main choice is not simply tank size or maximum pressure. I would compare delivered airflow at your working pressure, electrical capacity, duty demands, sound levels, and the room available for installation. The products below are ranked for distinct use cases, not treated as interchangeable machines.
Complete the kit
Key Takeaways
- The Ingersoll Rand 2475N7.5 leads this group for high-volume shop work, supplying 24 CFM with an 80-gallon tank, but it weighs 611 pounds and requires 230V power.
- The Ingersoll Rand 2340L5-V offers 14.3 CFM at 90 PSI from a 5 HP motor and 60-gallon tank, making it a practical middle ground for demanding workshops.
- The Campbell Hausfeld is the quieter listed option at 65 dB and reaches 175 PSI, but its stated airflow is much lower than the two Ingersoll Rand models.
- The HPDAVV delivers 140 CFM for industrial demand, yet its 460V three-phase requirement and 1,098-pound weight make it unsuitable for most home shops.
- All four use two-stage compression, but the HPDAVV is a rotary screw design; the other three use reciprocating cast-iron pumps, so their maintenance and duty profiles differ.
| Ingersoll Rand 2475N7.5 7.5 HP Two-Stage Air Compressor |  | Best Overall for High-Demand Shops | Motor: 7.5 HP | Tank: 80 gallons, ASME receiver | Maximum pressure: 175 PSI | VIEW ON AMAZON | See Our Full Breakdown |
| Ingersoll Rand 2340L5-V 5 HP Type 30 Two-Stage Air Compressor |  | Best for Serious Workshops | Motor: 5 HP | Tank: 60 gallons, vertical | Maximum pressure: 175 PSI | VIEW ON AMAZON | See Our Full Breakdown |
| Campbell Hausfeld 60-Gallon Two-Stage Air Compressor, 175 PSI, 230V |  | Best for a Quieter Moderate-Demand Shop | Motor: 3.7 HP induction motor | Tank: 60 gallons, vertical ASME | Maximum pressure: 175 PSI | VIEW ON AMAZON | See Our Full Breakdown |
| HPDAVV 30 HP Two-Stage Rotary Screw Air Compressor, 140 CFM, 115 PSI, 460V |  | Best for Industrial Air Demand | Motor: 30 HP / 22 kW permanent magnet | Compression: Two-stage rotary screw | Airflow: 140 CFM | VIEW ON AMAZON | See Our Full Breakdown |
| two stage air compressor | Motor | Maximum pressure | Airflow | Power |
|---|---|---|---|---|
| Ingersoll Rand 2475N7.5 7.5 HP | 7.5 HP | 175 PSI | 24 CFM; pressure point not specified | 230V, single phase; 32 A maximum current |
| Ingersoll Rand 2340L5-V 5 HP T | 5 HP | 175 PSI | 14.3 CFM at 90 PSI | 230V corded electric |
| Campbell Hausfeld 60-Gallon Tw | 3.7 HP induction motor | 175 PSI | 7.6 CFM at 90 PSI; 6.9 CFM at 175 PSI | 230V |
| HPDAVV 30 HP Two-Stage Rotary | 30 HP / 22 kW permanent magnet | 115 PSI / 8 bar | 140 CFM | 460V, 60 Hz, three phase |
More Details on Our Top Picks
Ingersoll Rand 2475N7.5 7.5 HP Two-Stage Air Compressor
The 2475N7.5 is my lead choice for a shop that regularly runs air-hungry equipment and has the infrastructure to support a large stationary compressor. Its listed 24 CFM output and 80-gallon ASME tank give it the strongest combination of stated airflow and receiver capacity among the reciprocating models here. It also reaches 175 PSI, leaving headroom for tools or systems that benefit from pressure above common shop operating levels.
Compared with the 5 HP 2340L5-V, this model is aimed at greater demand: it has a larger motor and tank, and the stated airflow is higher. That extra capacity comes with a substantial installation burden. At 611 pounds, it is not a unit to move casually, and it calls for 230V power with a listed maximum current of 32 A. Its 85 dB noise rating also makes location and hearing protection part of the setup decision. Synthetic lubricant is described as supporting longer service intervals, but it does not remove the need for routine maintenance.
I would choose it when multiple demanding tools or sustained shop work make the extra capacity worthwhile. The Campbell Hausfeld is quieter and lighter, while the 2340L5-V may suit a shop that wants heavy-duty capability without stepping up to this model’s stated output and 80-gallon tank. Skip this compressor if your wiring, floor, access path, or air demand cannot justify its scale.
Pros:- Listed 24 CFM output suits higher air demand than the other reciprocating models here.
- 80-gallon ASME receiver helps buffer air use during demanding shop tasks.
- 175 PSI maximum pressure and cast-iron two-stage pump target heavy-duty service.
- Synthetic lubricant is specified to support longer service intervals.
Cons:- Requires 230V power and has a listed maximum current of 32 A.
- At 611 pounds and 85 dB, installation and operating location need careful planning.
- Its stated 24 CFM figure lacks a pressure point in the supplied specifications, limiting direct airflow comparison.
Best for: A professional or serious workshop with 230V capacity, a suitable permanent installation area, and sustained demand from air-hungry tools.
Not ideal for: Home users with limited electrical service, noise-sensitive workspaces, modest tool demand, or no safe way to install a 611-pound stationary compressor.
- Motor:7.5 HP
- Tank:80 gallons, ASME receiver
- Maximum pressure:175 PSI
- Airflow:24 CFM; pressure point not specified
- Power:230V, single phase; 32 A maximum current
- Pump:Cast-iron, two-stage
- Noise:85 dB
- Weight:611 pounds
Our verdict“I rank the 2475N7.5 first for high-demand shops that can accommodate its power, weight, and noise.”
Ingersoll Rand 2340L5-V 5 HP Type 30 Two-Stage Air Compressor
The 2340L5-V is the balanced heavy-shop option in this group. Its 5 HP motor, 60-gallon vertical tank, and stated 14.3 CFM at 90 PSI target users who need more air than the Campbell Hausfeld lists, without moving up to the 7.5 HP Ingersoll Rand’s 80-gallon format. The 175 PSI maximum pressure and cast-iron pump suit demanding applications, including automotive work and general maintenance, when the compressor is correctly sized for the tools.
Its airflow figure is especially useful because it is specified at 90 PSI, a common working pressure for pneumatic tools. Compared with the Campbell Hausfeld’s 7.6 CFM at 90 PSI, the 2340L5-V offers a substantial step up in stated delivery. Compared with the 2475N7.5, however, it has a smaller motor and receiver, and its listed airflow is lower. Buyers should also plan around 230V power, a 430-pound unit, and an 85 dB noise rating. This is stationary equipment, not a compressor to place wherever a spare outlet happens to be.
I would select it for a workshop that needs meaningful sustained air but does not require the largest reciprocating model here. The Campbell Hausfeld is a better fit where quieter operation and lower listed airflow meet the workload; the 2475N7.5 makes more sense where demand regularly exceeds this model’s capacity. Skip it if portability, low noise, or standard household power is a priority.
Pros:- 14.3 CFM at 90 PSI gives a clear reference for matching tools.
- 60-gallon vertical tank supports extended shop use.
- Cast-iron two-stage pump and 175 PSI maximum pressure suit demanding applications.
- Its 5 HP configuration is less powerful than the 2475N7.5 while exceeding the Campbell Hausfeld’s listed airflow.
Cons:- Weighs 430 pounds and needs a stable, planned installation.
- Runs at a listed 85 dB, so placement and hearing protection matter.
- Requires 230V power and may need professional installation.
Best for: Automotive, repair, or general-maintenance shops that need 14.3 CFM at 90 PSI and can provide a permanent 230V installation.
Not ideal for: Buyers who need a portable compressor, a quieter working environment, or higher stated output for several demanding tools running together.
- Motor:5 HP
- Tank:60 gallons, vertical
- Maximum pressure:175 PSI
- Airflow:14.3 CFM at 90 PSI
- Power:230V corded electric
- Pump:Cast-iron, two-stage
- Noise:85 dB
- Weight:430 pounds
Our verdict“I recommend the 2340L5-V when a shop needs a substantial step up from moderate-duty air without the 2475N7.5’s larger format.”
Campbell Hausfeld 60-Gallon Two-Stage Air Compressor, 175 PSI, 230V
This Campbell Hausfeld is the approachable stationary pick for buyers whose workload fits its stated airflow and who value a lower listed noise level. The oil-lubricated, cast-iron two-stage pump supplies 7.6 CFM at 90 PSI and 6.9 CFM at 175 PSI, while the 60-gallon vertical tank stores air for intermittent use. A 175 PSI ceiling gives it room for higher-pressure applications, although pressure alone does not indicate how long it can keep a demanding tool running.
The clearest contrast is with the Ingersoll Rand 2340L5-V: both have 60-gallon vertical tanks and reach 175 PSI, but the Ingersoll Rand lists 14.3 CFM at 90 PSI, nearly twice the Campbell Hausfeld’s stated figure. For air-hungry tools or overlapping demand, that difference can matter more than their similar tank size. In return, the Campbell Hausfeld is listed at 65 dB rather than 85 dB, a meaningful distinction for a workshop where compressor noise affects nearby work. It weighs 255 pounds, still heavy for casual relocation, and requires a dedicated 230/240V supply.
I see this model as a fit for sanding, painting, grinding, and nailing when the tool requirements align with its airflow. It is not the pick for continuous high-demand operation simply because it has a large tank. Choose the 2340L5-V for more stated air delivery, or the 2475N7.5 for a still larger shop system. Skip this model if your tools need more than its rated airflow at working pressure.
Pros:- 60-gallon vertical ASME tank stores air while taking advantage of a vertical footprint.
- Listed at 65 dB, lower than the 85 dB ratings of both Ingersoll Rand models.
- Two-stage cast-iron, oil-lubricated pump and 175 PSI maximum pressure.
- Provides airflow figures at both 90 PSI and 175 PSI.
Cons:- 7.6 CFM at 90 PSI is well below the 2340L5-V’s stated 14.3 CFM at 90 PSI.
- Requires dedicated 230/240V electrical service.
- At 255 pounds, it is heavy to reposition despite being lighter than the other stationary piston picks.
Best for: A workshop with moderate air demand that wants a 60-gallon stationary compressor and a lower listed noise level than the Ingersoll Rand models.
Not ideal for: Users running high-CFM tools for long periods, several tools at once, or anyone without a dedicated 230/240V supply.
- Motor:3.7 HP induction motor
- Tank:60 gallons, vertical ASME
- Maximum pressure:175 PSI
- Airflow:7.6 CFM at 90 PSI; 6.9 CFM at 175 PSI
- Power:230V
- Pump:Oil-lubricated, two-stage cast iron
- Noise:65 dB
- Weight:255 pounds
Our verdict“I would choose the Campbell Hausfeld for moderate shop work where its lower noise and 7.6 CFM rating fit the actual tools.”
HPDAVV 30 HP Two-Stage Rotary Screw Air Compressor, 140 CFM, 115 PSI, 460V
The HPDAVV is the outlier in this roundup, and that is its point. Rather than a reciprocating cast-iron pump with a large receiver, it uses a two-stage rotary screw design with a 30 HP permanent magnet motor and variable frequency drive. Its stated 140 CFM at up to 115 PSI belongs in an industrial setting where air demand is large and relatively steady. The drive can adjust motor speed to demand, a design feature intended to vary output rather than run at one fixed speed.
That capacity is far beyond the listed output of the shop-oriented Campbell Hausfeld and the two Ingersoll Rand reciprocating compressors. But the pressure ceiling is lower: 115 PSI maximum, compared with 175 PSI for the other three. A buyer choosing by PSI alone may overlook the HPDAVV’s much higher airflow, while a buyer focused on a 175 PSI system should look elsewhere. It also requires 460V, three-phase power, weighs 1,098 pounds, and occupies a substantial footprint. Its listed 78 dB noise level is below the Ingersoll Rand ratings but above the Campbell Hausfeld’s.
I would treat this as a plant-level solution, not a larger version of a home-shop compressor. Its 140 CFM rating may be compelling when the facility has matching demand, power, and installation capacity. The 2475N7.5 is much more plausible for a heavy workshop, while the 2340L5-V and Campbell Hausfeld suit progressively lower air demand. Skip this machine unless the site can provide three-phase 460V service and the process needs industrial-scale air.
Pros:- 140 CFM rating is the highest stated airflow in this comparison.
- Variable frequency drive is designed to adjust motor speed to air demand.
- Rotary screw, two-stage configuration differs from the reciprocating shop models.
- 78 dB listed noise is below the 85 dB ratings of the Ingersoll Rand compressors.
Cons:- Requires 460V, three-phase power, a major installation constraint for ordinary shops.
- Maximum pressure is 115 PSI, lower than the 175 PSI offered by the other three models.
- Weighs 1,098 pounds and needs industrial-scale placement and handling.
- Listed warranty is 12 months for parts.
Best for: Industrial facilities with high continuous air demand, a 460V three-phase supply, and room and equipment to install a 1,098-pound compressor.
Not ideal for: Home garages, small repair shops, buyers who need up to 175 PSI, or sites without three-phase 460V electrical service.
- Motor:30 HP / 22 kW permanent magnet
- Compression:Two-stage rotary screw
- Airflow:140 CFM
- Maximum pressure:115 PSI / 8 bar
- Power:460V, 60 Hz, three phase
- Drive:Variable frequency drive
- Noise:78 dB
- Weight:1,098 pounds
- Warranty:12-month parts warranty
Our verdict“I recommend the HPDAVV only for facilities that need industrial airflow and already have the electrical and installation capacity it demands.”
How We Picked
I ranked these compressors by how clearly each matches a real air-demand level, from a quieter stationary workshop to a high-output industrial plant. Airflow at a stated pressure carries more weight than tank capacity alone: a large receiver can buffer demand, but it cannot make a compressor deliver more air continuously. I also considered maximum pressure, motor and power requirements, tank size, noise, construction, and the practicality of installing machines weighing hundreds or more than a thousand pounds.
The listed specifications do not provide a directly comparable airflow figure for every model at the same pressure. I keep those differences visible rather than treating the numbers as equivalent. The Campbell Hausfeld figure is 7.6 CFM at 90 PSI, the 2340L5-V is listed at 14.3 CFM at 90 PSI, and the 2475N7.5 is described as delivering 24 CFM without a matching pressure point in the supplied details. The HPDAVV is rated for 140 CFM up to 115 PSI and uses a rotary screw system, so I judge it as an industrial alternative, not a direct replacement for a shop piston compressor.
My ranking favors useful capability paired with a plausible audience. The 2475N7.5 earns the first position for buyers who can support its electrical and installation needs; the 2340L5-V follows as the more restrained heavy-shop option. Campbell Hausfeld ranks as the quieter pick for moderate work. HPDAVV receives a specialized industrial role because its exceptional output comes with infrastructure requirements that exclude many buyers. I do not infer features absent from the supplied specifications, and I treat weight, noise, and electrical supply as real selection costs.
| two stage air compressor | Pump |
|---|---|
| Ingersoll Rand 2475N7.5 7.5 HP | Cast-iron, two-stage |
| Ingersoll Rand 2340L5-V 5 HP T | Cast-iron, two-stage |
| Campbell Hausfeld 60-Gallon Tw | Oil-lubricated, two-stage cast iron |
| HPDAVV 30 HP Two-Stage Rotary | — |
Factors to Consider When Choosing Two Stage Air Compressor
I would size a two-stage compressor around the tools and work cycle first, then check the electrical service and installation site. The models here range from 7.6 CFM at 90 PSI to 140 CFM, so a shared label does not make them equivalent choices.
Match airflow to the tool, not just the tank
Check each tool’s required CFM at its working pressure, then account for tools that may operate at the same time and how continuously they run. The Campbell Hausfeld lists 7.6 CFM at 90 PSI; the 2340L5-V lists 14.3 CFM at 90 PSI. That makes the latter the clearer step up for higher air demand. A tank can provide a reserve for short bursts, but it does not raise the compressor’s ongoing delivery. The 2475N7.5 lists 24 CFM, but its supplied description does not state the pressure point, so confirm the relevant rating before comparing it directly to a tool requirement.
Treat pressure and airflow as separate requirements
Maximum pressure describes the upper pressure limit; CFM describes the volume of air delivered. The three reciprocating models reach 175 PSI, while the HPDAVV tops out at 115 PSI and has a much higher 140 CFM rating. If a system truly needs pressure above 115 PSI, the HPDAVV is not a match even if its airflow is attractive. If the work needs large volumes at a moderate pressure, its rotary screw design may be more relevant than a piston model. I would compare both numbers against equipment requirements rather than choosing by maximum PSI alone.
Use receiver capacity to understand buffering
A larger tank stores more compressed air between pump cycles and can help cover short bursts of demand. Here, the 80-gallon 2475N7.5 has the largest receiver among the piston models, while the Campbell Hausfeld and 2340L5-V each have a 60-gallon tank. Tank capacity is not a substitute for adequate CFM during long sanding, spraying, or production runs. For repeated high-demand work, prioritize the compressor’s delivered airflow and duty suitability, then use tank size as a supporting factor.
Check power before choosing a model
The three stationary piston compressors require 230V service; the Campbell Hausfeld description specifies 230V and notes a dedicated 230/240V supply. The HPDAVV needs 460V, three-phase power, a much more specialized installation. The 2475N7.5 lists a maximum current of 32 A. Before purchase, compare the motor and electrical specifications with the site’s supply and have a qualified electrician review the circuit and installation plan. A compressor that exceeds available electrical capacity is not a practical upgrade.
Plan for weight, footprint, and sound
These are stationary machines, with listed weights from 255 pounds to 1,098 pounds. Confirm doorways, access routes, floor support, and final placement before arranging delivery. Noise also separates the models: Campbell Hausfeld is listed at 65 dB, the HPDAVV at 78 dB, and both Ingersoll Rand models at 85 dB. Those figures can help screen options, but real sound at the work area depends on placement and surroundings. Allow room for service access and follow the manufacturer’s ventilation and installation guidance.
Understand the pump type and service needs
The Campbell Hausfeld and both Ingersoll Rand models use oil-lubricated or cast-iron reciprocating pump designs as described in their specifications; the HPDAVV uses a rotary screw arrangement. These categories are designed for different operating environments and should not be compared as if only the motor size changed. The 2475N7.5 includes synthetic lubricant intended to support longer service intervals, but all compressors need maintenance according to their manuals. Review lubrication, drainage, filters, and service access before committing to an installation.
Frequently Asked Questions
What does two-stage mean in an air compressor?
A two-stage compressor raises air pressure in two compression steps rather than one. In the reciprocating models here, that design is paired with a cast-iron pump and a maximum pressure of 175 PSI. The HPDAVV also uses two-stage compression, but through a rotary screw system. The label alone does not tell you how much air a machine supplies; compare its CFM rating at the pressure your tools require.
Which compressor in this group delivers the most airflow?
The HPDAVV has the highest stated capacity at 140 CFM, up to 115 PSI, but it needs 460V three-phase power and is intended for industrial demand. Among the reciprocating models, the 2475N7.5 lists 24 CFM, though the supplied specifications do not state the pressure point. The 2340L5-V lists 14.3 CFM at 90 PSI, while the Campbell Hausfeld lists 7.6 CFM at 90 PSI.
Is a 60-gallon tank enough for air tools?
A 60-gallon tank can work well when the compressor’s delivered airflow matches the tools and work cycle. Both the Campbell Hausfeld and 2340L5-V have 60-gallon tanks, yet their listed airflow at 90 PSI differs substantially: 7.6 CFM versus 14.3 CFM. For short bursts, tank capacity provides a reserve; for continuous use, the compressor must keep up with demand. Check tool requirements and simultaneous use rather than choosing by gallons alone.
Can I run these compressors on ordinary household power?
These models are not described as standard household-outlet compressors. The Campbell Hausfeld and both Ingersoll Rand piston models require 230V service; the 2475N7.5 also lists 32 A maximum current. The HPDAVV requires 460V, three-phase power. I would verify the exact electrical requirements with the product documentation and a qualified electrician before purchase, rather than assuming an existing outlet can support the motor.
Which model should I choose for a quieter workshop?
Based on the listed noise figures, the Campbell Hausfeld is the quieter choice at 65 dB, compared with 78 dB for the HPDAVV and 85 dB for both Ingersoll Rand models. That makes it the first one to examine for a noise-sensitive shop, provided its 7.6 CFM at 90 PSI meets the tool demand. A lower listed noise level does not compensate for insufficient airflow, so match capacity first and plan placement around the work area.
Conclusion
My recommendation depends on the scale of the air system you need. For a high-demand professional shop with suitable 230V service and room for a 611-pound machine, I would start with the Ingersoll Rand 2475N7.5. For a serious workshop seeking a middle ground, the 2340L5-V offers 14.3 CFM at 90 PSI in a 60-gallon package, though it remains heavy and loud. For moderate shop work where lower listed noise matters, the Campbell Hausfeld is the sensible pick if its airflow fits your tools. For an industrial facility needing very high airflow and already equipped for 460V three-phase power, the HPDAVV has a specialized role; its 115 PSI ceiling and installation demands rule it out for many shops. I would decide by required CFM, available power, and realistic installation conditions—not by tank size or two-stage labeling alone.
Halloween Picks
halloween
As an affiliate, we earn on qualifying purchases.
