The best overall pin nailer in this roundup is the DEWALT 23-Gauge Pin Nailer (DWFP2350K), a strong choice for buyers who want a corded-by-hose pneumatic tool with a 2-inch pin capacity. For cordless convenience, the DEWALT ATOMIC DCN623D1 kit stands out, while the Metabo HPT NP35A is a capable pneumatic alternative. The main choice is between lighter pneumatic tools that need a compressor and cordless models that add freedom but depend on a compatible battery platform. Nail-length range, access in tight spaces, and whether batteries or pins are included also separate these options. Read on for the full comparison and guidance on which pin nailer fits your projects.
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
Complete the kit
Key Takeaways
- The DWFP2350K leads for reach: its 2-inch pin capacity gives it more length flexibility than the PORTER-CABLE PIN138, which tops out at 1-3/8 inches.
- Cordless convenience comes with a platform choice: the DEWALT ATOMIC models and RYOBI ONE+ avoid an air hose, but make the most sense when you already own compatible batteries and chargers.
- Kit contents affect readiness: the DEWALT ATOMIC kit includes a battery and charger, while the listed bare-tool models require compatible batteries to operate.
- Several listings share a product name: the KEENTECH and EASEWORK models appear more than once, so compare listing details and included nails rather than treating duplicate entries as distinct designs.
- Pneumatic picks suit buyers who already have air: DEWALT, Metabo HPT, Arrow, PORTER-CABLE, EASEWORK, and KEENTECH options avoid adding a cordless battery platform, but require a compressor and hose.
| DEWALT 23-Gauge Pin Nailer, 2-Inch (DWFP2350K) |  | Best for Longer Pins | Gauge: 23 | Nail length: 5/8 to 2 inches | Operation: Pneumatic, oil-free | VIEW ON AMAZON | See Our Full Breakdown |
| KEENTECH 23-Gauge Pneumatic Pin Nailer with 2,160 Pin Nails |  | Best Starter Bundle | Gauge: 23 | Compatible nail lengths: 5/32 to 1 inch (4–25 mm) | Included nails: 2,160 (P620, P625, and P630) | VIEW ON AMAZON | See Our Full Breakdown |
| KEENTECH 23-Gauge Pneumatic Pin Nailer with 2,160 Pins |  | Best for Fewer Reloads | Gauge: 23 | Compatible pin length: 1/2–1-3/8 inches (12–35 mm) | Included pins: 2,160 (P620, P625, and P630) | VIEW ON AMAZON | See Our Full Breakdown |
| EASEWORK 23-Gauge Pneumatic Pin Nailer |  | Best for Fast Detail Work | Gauge: 23 | Compatible pin length: 5/32–1 inch (4–25 mm) | Magazine capacity: 100 pins | VIEW ON AMAZON | See Our Full Breakdown |
| CRAFTSMAN V20 Brushless 23-Gauge Pin Nailer, Bare Tool (CMCN623B) |  | Best Cordless Option | Model: CMCN623 | Fastener type: 23-gauge pin nails | Compatible nail length: 5/8–1-3/8 inches | VIEW ON AMAZON | See Our Full Breakdown |
| KEENTECH 23-Gauge Pneumatic Pin Nailer with 2,160 Pins |  | Best Starter Kit | Gauge: 23 | Compatible pin length: 5/32–1 in (4–25 mm) | Included pins: 2,160 in P620, P625, and P630 sizes | VIEW ON AMAZON | See Our Full Breakdown |
| Arrow PT23G 23-Gauge Compact Pneumatic Pin Nailer |  | Best for Simple, Low-Maintenance Projects | Tool type: Pneumatic pin nailer | Gauge: 23 | Compatible nail lengths: 3/8, 1/2, 5/8, 13/16, and 1 in | VIEW ON AMAZON | See Our Full Breakdown |
| EASEWORK 23-Gauge Pneumatic Pin Nailer |  | Best for Longer Pins and Frequent Reloading | Gauge: 23 | Compatible pin length: 1/2–1-3/8 in (12–35 mm) | Magazine capacity: 125 pins | VIEW ON AMAZON | See Our Full Breakdown |
| PORTER-CABLE 23-Gauge Pin Nailer, 1-3/8-Inch (PIN138) |  | Best Lightweight Long-Pin Option | Gauge: 23 | Maximum pin length: 1-3/8 in | Power source: Air-powered | VIEW ON AMAZON | See Our Full Breakdown |
| RYOBI ONE+ 18V Cordless AirStrike 23-Gauge Pin Nailer (Tool Only) |  | Best Cordless Convenience | Voltage: 18V | Power source: Battery powered | Recommended uses: Nailing and repair | VIEW ON AMAZON | See Our Full Breakdown |
| DEWALT ATOMIC 20V MAX Brushless Cordless 23-Gauge Pin Nailer Kit (DCN623D1) |  | Best Cordless Kit | Model: DCN623D1 | Fastener gauge: 23 Ga. | Fastener length: 5/8–1-1/2 in. | VIEW ON AMAZON | See Our Full Breakdown |
| DEWALT ATOMIC 20V MAX Brushless Cordless 23-Gauge Pin Nailer |  | Best for DEWALT 20V Owners | Model: DCN623B | Fastener gauge: 23 Ga. | Fastener length: 5/8–1-1/2 in. | VIEW ON AMAZON | See Our Full Breakdown |
| Metabo HPT NP35A 23-Gauge Pneumatic Pin Nailer |  | Best Lightweight Pneumatic Pick | Model: NP35A | Type: Pneumatic pin nailer | Gauge: 23 | VIEW ON AMAZON | See Our Full Breakdown |
| pin nailer | Gauge | Warranty | Power source |
|---|---|---|---|
| DEWALT 23-Gauge Pin Nailer | 23 | — | — |
| KEENTECH 23-Gauge Pneumatic Pi | 23 | — | — |
| KEENTECH 23-Gauge Pneumatic Pi | 23 | — | — |
| EASEWORK 23-Gauge Pneumatic Pi | 23 | 3 years | — |
| CRAFTSMAN V20 Brushless 23-Gau | — | 3-year limited warranty | Cordless |
| KEENTECH 23-Gauge Pneumatic Pi | 23 | 3-year after-sales service | Compressed air |
| Arrow PT23G 23-Gauge Compact P | 23 | 1-year limited manufacturer warranty | — |
| EASEWORK 23-Gauge Pneumatic Pi | 23 | 3 years | Compressed air; compressor not included |
| PORTER-CABLE 23-Gauge Pin Nail | 23 | 1 year on materials and workmanship | Air-powered |
| RYOBI ONE+ 18V Cordless AirStr | — | 30-day limited warranty | Battery powered |
| DEWALT ATOMIC 20V MAX Brushles | — | — | 20V MAX battery |
| DEWALT ATOMIC 20V MAX Brushles | — | — | 20V MAX battery |
| Metabo HPT NP35A 23-Gauge Pneu | 23 | 5-year professional tool warranty | — |
More Details on Our Top Picks
DEWALT 23-Gauge Pin Nailer, 2-Inch (DWFP2350K)
The DEWALT DWFP2350K is the clear pick here when reach matters: its 23-gauge headless pins extend to 2 inches, longer than the 1-inch KEENTECH and EASEWORK models and the CRAFTSMAN cordless option’s 1-3/8-inch limit. That extra length can help secure thicker trim or hold work in harder wood, and the product description specifically notes driving recessed pins into oak. Tool-free depth adjustment and jam release make routine changes less of a hassle, while oil-free operation helps avoid oil marks on finished surfaces. The tradeoff is that this is a pneumatic tool, so it depends on an air compressor and hose; the CRAFTSMAN offers cordless operation instead. It also accepts 23-gauge headless pins only, so it is not a substitute for a brad nailer.
Pros:- Accepts pins from 5/8 to 2 inches, the longest range among these five options
- Tool-free depth adjustment and jam release simplify setup and clearing
- Oil-free operation helps reduce the risk of marks on finished work
- Includes a carrying case and two no-mar tips
Cons:- Requires a separate pneumatic air supply
- Limited to 23-gauge headless pins
- Its minimum pin length is 5/8 inch, so it does not cover the shorter lengths accepted by the KEENTECH and EASEWORK models
Best for: Trim carpenters and furniture makers who need a pneumatic 23-gauge pin nailer that can drive pins up to 2 inches into thicker stock.
Not ideal for: DIYers without an air compressor or buyers who want cordless convenience or a tool compatible with brad nails.
- Gauge:23
- Nail length:5/8 to 2 inches
- Operation:Pneumatic, oil-free
- Item weight:8 ounces
- Model:DWFP2350K
- Included components:1/4-inch fitting, carrying case, 2 no-mar tips, owner’s manual
Our verdict“Choose the DEWALT if you need long 23-gauge pins and already have a compatible air supply; skip it if cordless use is the priority.”
KEENTECH 23-Gauge Pneumatic Pin Nailer with 2,160 Pin Nails
This KEENTECH bundle is aimed at buyers who want pins included from the outset: it comes with 2,160 nails in three specifications, while the DEWALT DWFP2350K package lists a case and tips but no pins. Its 5/32-to-1-inch range suits small trim, cabinetry details, and delicate assembly, but it gives up the longer reach of the DEWALT and the 1-3/8-inch capacity of the other KEENTECH model in this batch. The slim nose is intended to help place pins accurately, and the 100-nail magazine keeps the tool relatively simple to load. The downside is that the included assortment does not remove the need for an air compressor, which is sold separately. Buyers who expect frequent reloads may prefer the 160-pin capacity of the KT-P635A.
Pros:- Includes 2,160 pins in three specifications
- Accepts short pins from 5/32 to 1 inch for delicate trim and detail work
- Slim nose is designed for precise placement
- Lightweight aluminum body and ergonomic rubber grip
Cons:- Requires an air compressor, sold separately
- 100-nail magazine is smaller than the 160-pin magazine on the KEENTECH KT-P635A
- Maximum 1-inch pin length limits use on thicker assemblies
Best for: First-time pin nailer buyers who already own an air compressor and want a short-pin tool with a supply of assorted pins included.
Not ideal for: Woodworkers fastening thicker stock or working through long sessions who would benefit from longer pins or a larger magazine.
- Gauge:23
- Compatible nail lengths:5/32 to 1 inch (4–25 mm)
- Included nails:2,160 (P620, P625, and P630)
- Magazine capacity:100 nails
- Working pressure:60–120 PSI (0.4–0.8 MPa)
- Air inlet:Fixed 1/4-inch NPT
- Material:Aluminum alloy
- Tool weight:1.87 lb
- Nailing speed:Up to 180 nails per minute
Our verdict“Pick this KEENTECH for short-pin detail work and an included nail assortment, but choose the KT-P635A or DEWALT if you need more magazine capacity or longer pins.”
KEENTECH 23-Gauge Pneumatic Pin Nailer with 2,160 Pins
The KT-P635A separates itself from the smaller KEENTECH model with a 160-pin magazine and a longer 1/2-to-1-3/8-inch range. That capacity means fewer interruptions during repeated trim or furniture assembly, while its added reach makes it more versatile than the 1-inch KEENTECH and EASEWORK nailers. It also includes 2,160 pins in three sizes and a dual safety trigger, a useful distinction for buyers who value an added firing safeguard. The CRAFTSMAN CMCN623B avoids the compressor and hose, but its battery and charger are sold separately and its pin range starts at 5/8 inch. Here, the tradeoff is dependence on compressed air, plus a fixed air inlet. At 2.68 pounds, it is also heavier than the 1.87-pound KEENTECH option.
Pros:- 160-pin magazine reduces reload frequency compared with the 100-pin KEENTECH and EASEWORK models
- Accepts pins from 1/2 to 1-3/8 inches
- Includes 2,160 pins in three sizes
- Dual safety trigger helps guard against accidental firing
Cons:- Requires a separate air compressor
- Fixed, non-removable 1/4-inch NPT air inlet
- At 2.68 pounds, it is heavier than the 1.87-pound KEENTECH KT-P625B
Best for: Cabinetmakers and trim workers who already have compressed air and want a larger magazine, an included pin assortment, and more length range than a 1-inch model.
Not ideal for: Users who need cordless mobility, the lightest pneumatic tool, or pins longer than 1-3/8 inches.
- Gauge:23
- Compatible pin length:1/2–1-3/8 inches (12–35 mm)
- Included pins:2,160 (P620, P625, and P630)
- Magazine capacity:160 pins
- Working pressure:60–120 PSI (0.4–0.8 MPa)
- Air inlet:Fixed 1/4-inch NPT
- Material:Aluminum alloy
- Weight:2.68 lb
- Safety:Dual safety trigger
Our verdict“Choose the KT-P635A for longer sessions and a broader pin range than the smaller KEENTECH model, provided you have compressed air available.”
EASEWORK 23-Gauge Pneumatic Pin Nailer
The EASEWORK is a straightforward choice for repeat detail work where short pins and quick firing matter more than reach. It accepts 23-gauge pins from 5/32 to 1 inch, matching the short range of the KEENTECH KT-P625B, and lists a firing rate of up to 200 nails per minute—above that KEENTECH’s stated 180. Its 100-pin magazine is adequate for trim and cabinetry tasks, though the KEENTECH KT-P635A’s 160-pin capacity is better suited to longer runs with fewer pauses. EASEWORK lists a three-year warranty, but it does not include the 2,160-pin assortment supplied with either KEENTECH model. Like those pneumatic alternatives, it also requires a separate compressor. Its narrow pin format is for fine fastening, not jobs that call for 18-gauge brads.
Pros:- Accepts short 23-gauge pins from 5/32 to 1 inch for delicate work
- Stated firing rate reaches up to 200 nails per minute
- Lightweight aluminum alloy body with an ergonomic rubber grip
- Three-year warranty
Cons:- Requires a separate air compressor
- 100-pin capacity is lower than the KEENTECH KT-P635A’s 160-pin magazine
- Not compatible with 18-gauge brad nails and does not include pins
Best for: Detail-focused DIYers and finish workers who already own an air compressor and mainly fasten small trim, molding, or cabinet components.
Not ideal for: Buyers who need longer pins, included fasteners, cordless operation, or a tool that can fire 18-gauge brads.
- Gauge:23
- Compatible pin length:5/32–1 inch (4–25 mm)
- Magazine capacity:100 pins
- Operating pressure:60–120 PSI (0.4–0.8 MPa)
- Air inlet:1/4-inch NPT
- Weight:1.87 lb product weight; 2.16 lb listed item weight
- Material:Aluminum alloy
- Firing rate:Up to 200 nails per minute
- Warranty:3 years
Our verdict“Pick the EASEWORK for rapid, short-pin detail work if you already have compressed air; choose a larger-capacity model for extended runs.”
CRAFTSMAN V20 Brushless 23-Gauge Pin Nailer, Bare Tool (CMCN623B)
For buyers who want to leave the compressor and hose behind, the CRAFTSMAN V20 CMCN623B is the only cordless model among these five. Its brushless motor supports longer runtime, while the LED work light and tool-free jam release address visibility and stoppages without requiring a pneumatic setup. Pin length runs from 5/8 to 1-3/8 inches: that reaches farther than the 1-inch KEENTECH KT-P625B and EASEWORK, but not as far as the DEWALT DWFP2350K’s 2-inch maximum. The main catch is the bare-tool format—battery and charger are sold separately—so it makes the most sense for existing V20 owners. Buyers starting from scratch may prefer one of the pneumatic models if they already have a compressor and want pins included.
Pros:- Cordless operation avoids a compressor and air hose
- Brushless motor supports longer runtime
- Tool-free jam release simplifies clearing stoppages
- LED work light helps illuminate the fastening area
Cons:- Battery and charger are sold separately
- Maximum 1-3/8-inch pin length falls short of the DEWALT DWFP2350K’s 2-inch reach
- No pin assortment is listed among the included components
Best for: CRAFTSMAN V20 tool owners doing trim or furniture work who need cordless pin placement without setting up an air hose.
Not ideal for: Buyers without a compatible battery and charger, or workers who need pins longer than 1-3/8 inches.
- Model:CMCN623
- Fastener type:23-gauge pin nails
- Compatible nail length:5/8–1-3/8 inches
- Motor:Brushless
- Power source:Cordless
- Included components:Pin nailer only
- Battery and charger:Sold separately
- Warranty:3-year limited warranty
Our verdict“Choose this bare tool if you already own CRAFTSMAN V20 batteries and want cordless convenience; otherwise, account for the separate battery and charger before choosing it.”
KEENTECH 23-Gauge Pneumatic Pin Nailer with 2,160 Pins
The KEENTECH makes a strong case for buyers who want pins and the tool in one package: its 2,160 included pins cover three sizes, so you can begin trim or craft work without sourcing fasteners separately. Its 100-pin magazine and side-loading design make reloading and clearing jams more manageable, while the slim nose helps place fasteners on delicate work. Compared with the Arrow PT23G, it accepts shorter pins, starting at 5/32 inch rather than 3/8 inch, which can suit smaller-scale projects. The tradeoff is shared by both pneumatic picks: you need a compressor, and this model’s fixed 1/4-inch air inlet offers less hose flexibility. Choose it for its included supplies, not for a cordless setup.
Pros:- Includes 2,160 pins across three sizes.
- Slim nose supports precise placement on delicate trim.
- Side-loading 100-pin magazine simplifies reloading and jam access.
- Lightweight body and rubber grip suit detailed work.
Cons:- Requires a compressor, which is not included.
- Fixed 1/4-inch NPT air inlet cannot be removed.
Best for: DIY trim and craft workers who already own a compressor and want a pin nailer with assorted fasteners included.
Not ideal for: Buyers without a compressor or anyone who needs a removable air fitting for a particular hose setup.
- Gauge:23
- Compatible pin length:5/32–1 in (4–25 mm)
- Included pins:2,160 in P620, P625, and P630 sizes
- Magazine capacity:100 pins
- Working pressure:60–120 PSI (0.4–0.8 MPa)
- Air inlet:Fixed 1/4 in NPT
- Power source:Compressed air
- Tool weight:1.87 lbs (manufacturer item weight: 2.4 lbs)
- Warranty:3-year after-sales service
Our verdict“Pick the KEENTECH if you have compressed air and want a ready-to-start kit with pins included.”
Arrow PT23G 23-Gauge Compact Pneumatic Pin Nailer
The Arrow PT23G is the straightforward choice for hobbyists who want a compact pneumatic nailer without oiling as part of routine upkeep. Its oil-free design, die-cast aluminum body, and safety trigger suit occasional trim, molding, and craft jobs where simple handling matters more than a broad pin-length range. Compared with the KEENTECH 23-Gauge Pneumatic Pin Nailer, the Arrow starts at 3/8-inch pins instead of 5/32 inch and does not include a supply of fasteners, so it is less ready-made for very small projects. Its side-loading magazine helps with access when reloading or clearing a jam, but the tool still depends on a compressor delivering steady pressure. That makes it a tidy workshop pick, not a solution for cordless repairs or varied pin lengths.
Pros:- Oil-free operation reduces routine maintenance.
- Compact die-cast aluminum construction is suited to detailed work.
- Side-loading magazine provides access for loading and jam clearing.
- Safety trigger helps reduce unintended firing.
Cons:- Requires a compatible compressor with consistent pressure.
- Accepts only specified 23-gauge pin lengths from 3/8 to 1 inch.
- No included pin quantity is listed.
Best for: Hobbyists and occasional trim installers who already have a compressor and value oil-free upkeep.
Not ideal for: Buyers seeking cordless convenience, included pins, or compatibility with pins shorter than 3/8 inch.
- Tool type:Pneumatic pin nailer
- Gauge:23
- Compatible nail lengths:3/8, 1/2, 5/8, 13/16, and 1 in
- Maximum operating pressure:100 PSI
- Material:Die-cast aluminum
- Maintenance:Oil-free
- Magazine:Side-loading
- Warranty:1-year limited manufacturer warranty
Our verdict“Choose the Arrow PT23G for occasional fine-finishing jobs if you prefer an oil-free pneumatic tool and already own a compressor.”
EASEWORK 23-Gauge Pneumatic Pin Nailer
For projects that call for longer headless pins, the EASEWORK reaches 1-3/8 inches and carries 125 pins, giving it a practical range and a little more time between reloads than the KEENTECH, whose magazine holds 100. The narrow nose and double safety trigger are aimed at accurate placement on cabinetry, molding, and fine woodworking; the rubber grip also helps during repeated handling. Its stated firing rate is up to 200 nails per minute, though most careful finish work is governed more by placement than speed. The cost of this capacity is the usual pneumatic setup: a compressor is required and not included. It also remains a 23-gauge specialist, not a substitute for an 18-gauge brad nailer when a joint needs a larger fastener.
Pros:- Accepts pins up to 1-3/8 inches long.
- 125-pin magazine reduces reload frequency compared with 100-pin models.
- Narrow nose and double safety trigger support controlled placement.
- Includes a 3-year warranty and a stated 800,000-nail test rating.
Cons:- Requires a separate air compressor.
- Limited to 23-gauge pins and cannot drive 18-gauge brads.
Best for: Cabinetmakers and trim workers who use longer 23-gauge pins and want a higher-capacity magazine for repeated work.
Not ideal for: Cordless-tool shoppers or anyone who needs 18-gauge brads or a fastener for structural joints.
- Gauge:23
- Compatible pin length:1/2–1-3/8 in (12–35 mm)
- Magazine capacity:125 pins
- Air inlet:1/4 in NPT
- Operating pressure:60–120 PSI (0.4–0.8 MPa)
- Weight:2.4 lbs (item weight)
- Firing rate:Up to 200 nails per minute
- Power source:Compressed air; compressor not included
- Warranty:3 years
Our verdict“Choose the EASEWORK for compressor-equipped shops that need long 23-gauge pins and fewer magazine stops.”
PORTER-CABLE 23-Gauge Pin Nailer, 1-3/8-Inch (PIN138)
The PORTER-CABLE PIN138 pairs a 2.2-pound weight with support for pins up to 1-3/8 inches, making it a focused option for finishers who want longer fasteners without moving to a heavier tool. That maximum length matches the EASEWORK, but the supplied details do not list a magazine capacity, firing rate, or included pins, so there is less information here for buyers comparing work pace and setup. At 11.5 inches long, it is also not as compact on paper as the Arrow PT23G, which is described as a compact model and tops out at 1-inch pins. The main limitation is straightforward: this is an air-powered tool, so a compressor and compatible hose setup are part of the purchase decision.
Pros:- Accepts 23-gauge pins up to 1-3/8 inches.
- At 2.2 pounds, it is relatively light for extended handling.
- Air-powered design avoids a battery platform.
Cons:- Requires an air source and is not cordless.
- Provided product data does not specify magazine capacity or operating pressure.
- One-year warranty is shorter than the three-year coverage listed for the EASEWORK.
Best for: Finish carpenters who want a relatively light pneumatic nailer for work requiring pins as long as 1-3/8 inches.
Not ideal for: Buyers who need cordless operation or want published magazine, pressure, and included-fastener details before choosing.
- Gauge:23
- Maximum pin length:1-3/8 in
- Power source:Air-powered
- Weight:2.2 lbs
- Dimensions:11.5 x 1 x 4 in
- Model:PIN138
- Warranty:1 year on materials and workmanship
Our verdict“Pick the PIN138 if low tool weight and long-pin capability matter more than cordless use or a fully documented feature set.”
RYOBI ONE+ 18V Cordless AirStrike 23-Gauge Pin Nailer (Tool Only)
The RYOBI ONE+ AirStrike is the cordless pick in this group, sidestepping the compressor and hose required by the Arrow PT23G and other pneumatic models. That freedom suits repair work around a home or shop where dragging out an air setup would slow a small job. The tradeoffs are substantial: at 4.3 pounds, it is heavier than the 1.87-pound KEENTECH tool-weight figure, and the battery and charger are sold separately. Its listed 30-day limited warranty is also shorter than the three-year warranties stated for the EASEWORK and KEENTECH. The supplied details do not specify compatible pin lengths or magazine capacity, so buyers should verify those before choosing it for a particular trim project. This makes the most sense for existing ONE+ owners prioritizing portability over weight.
Pros:- Battery-powered design removes the need for an air hose and compressor.
- Fits repair and general 23-gauge pin-nailing tasks.
- Uses the RYOBI ONE+ 18V platform.
Cons:- Battery and charger are sold separately.
- At 4.3 pounds, it is heavier than the listed pneumatic alternatives.
- Listed warranty is limited to 30 days, and pin-length details are not provided.
Best for: RYOBI ONE+ users who handle small repair and trim jobs away from a compressor and already have a compatible battery and charger.
Not ideal for: Buyers seeking a lightweight tool, a complete battery setup, or confirmed pin-length and magazine specifications.
- Voltage:18V
- Power source:Battery powered
- Recommended uses:Nailing and repair
- Weight:4.3 lbs
- Noise level:85 dB
- Model number:PCL310B
- Battery and charger:Sold separately
- Warranty:30-day limited warranty
Our verdict“Choose the RYOBI if cordless access is your priority and you already own a compatible ONE+ battery, after confirming its fastener range suits your work.”
DEWALT ATOMIC 20V MAX Brushless Cordless 23-Gauge Pin Nailer Kit (DCN623D1)
The DCN623D1 kit suits trim and cabinet work where dragging an air hose would get in the way. Its 20V battery platform lets you fasten without a compressor or gas cartridge, while the included battery and charger mean you can start using it without assembling a separate power setup. The brushless motor is rated for an average of 2,000 pins per charge, and tool-free depth adjustment and jam release simplify on-the-job corrections. Compared with the DCN623B bare tool, this version costs you less setup effort but duplicates a battery and charger if you already own compatible gear. It also accepts pins only up to 1-1/2 inches, so it is less suited to jobs needing longer fasteners than some alternatives. Choose it for cordless convenience, not the lightest or least expensive setup.
Pros:- Cordless operation avoids an air hose, compressor, and gas cartridges
- Battery and charger are included for a ready-to-use kit
- Tool-free jam release and depth adjustment support quick jobsite adjustments
- Low-nail lockout with LED indicator helps signal when to reload
Cons:- Duplicates the battery and charger for buyers already invested in DEWALT 20V tools
- Maximum pin length of 1-1/2 inches limits jobs requiring longer fasteners
- Battery-powered design adds bulk compared with the 2.0-pound Metabo HPT NP35A
Best for: Trim and cabinet installers who need a cordless pin nailer and do not already own a compatible DEWALT 20V battery and charger
Not ideal for: DEWALT 20V tool owners who already have batteries and a charger, or buyers whose projects require pins longer than 1-1/2 inches
- Model:DCN623D1
- Fastener gauge:23 Ga.
- Fastener length:5/8–1-1/2 in.
- Motor:Brushless
- Power source:20V MAX battery
- Nails per charge:2,000 average
- Battery included:20V MAX 2.0Ah Lithium-Ion
- Included components:Pin nailer, battery pack, charger
Our verdict“Choose this kit if you want DEWALT cordless convenience in one package and need pins no longer than 1-1/2 inches.”
DEWALT ATOMIC 20V MAX Brushless Cordless 23-Gauge Pin Nailer
For buyers already using DEWALT 20V tools, the DCN623B bare tool offers the same cordless fastening approach as the DCN623D1 kit without adding another battery and charger. It handles 5/8- to 1-1/2-inch, 23-gauge pins, with tool-free depth adjustment and jam release to make setup changes less disruptive. The low-nail lockout and LED indicator also help prevent a sequence of empty shots when the magazine runs low. Its brushless motor is rated for an average of 2,000 nails per charge, matching the kit version. The tradeoff is clear: buyers starting from scratch must acquire the battery and charger separately, so the kit is the more straightforward choice for them. Compared with the pneumatic Metabo HPT NP35A, this DEWALT removes the hose but weighs more and depends on battery power.
Pros:- Uses the DEWALT 20V MAX battery platform for hose-free work
- Brushless motor is rated for an average of 2,000 nails per charge
- Tool-free depth adjustment and jam release ease routine corrections
- Low-nail lockout and LED indicator provide a reload cue
Cons:- Battery and charger are not included
- Pin length is capped at 1-1/2 inches
- Heavier than the 2.0-pound pneumatic Metabo HPT NP35A
Best for: DEWALT 20V MAX tool owners who want to add a cordless pin nailer without buying another battery and charger
Not ideal for: First-time DEWALT 20V buyers who need a complete kit, or users who prefer a lighter pneumatic nailer and already have an air supply
- Model:DCN623B
- Fastener gauge:23 Ga.
- Fastener length:5/8–1-1/2 in.
- Motor:Brushless
- Power source:20V MAX battery
- Nails per charge:2,000 average
- Item weight:4.45 lbs
- Battery and charger:Not included
Our verdict“Pick the bare tool if you already own DEWALT 20V batteries; otherwise, the DCN623D1 kit is the simpler purchase.”
Metabo HPT NP35A 23-Gauge Pneumatic Pin Nailer
The Metabo HPT NP35A is the lineup’s lightweight choice for buyers who have an air supply and value control over cordless convenience. At 2.0 pounds, it is easier to handle during detailed cabinet, frame, and trim tasks than the 4.45-pound DEWALT DCN623B, though it requires a hose and compressor. Its depth adjustment supports flush fastening, while the no-mar tip helps protect finished surfaces. The dual trigger adds a deliberate operating step, which may appeal to users prioritizing controlled placement but can slow repetitive work compared with a simpler trigger setup. It accepts five listed pin lengths, from 5/8 to 1-3/8 inches; that range covers common delicate fastening, but it falls short of the DEWALT models’ 1-1/2-inch maximum. This is a focused pneumatic tool, not a grab-and-go cordless substitute.
Pros:- Light 2.0-pound weight supports detailed overhead or repetitive work
- Depth adjustment helps set pins flush
- No-mar tip helps protect finished work surfaces
- Five pin lengths accommodate a range of delicate fastening tasks
Cons:- Requires a pneumatic air supply, hose, and compressor
- Maximum listed pin length is shorter than the DEWALT models’ 1-1/2-inch capacity
- Dual trigger can slow repeated firing compared with a simpler trigger arrangement
Best for: Cabinetmakers, picture-frame builders, and trim workers with an air compressor who want a light tool for controlled, delicate fastening
Not ideal for: Mobile finish carpenters without a compressor, or buyers needing pins longer than 1-3/8 inches
- Model:NP35A
- Type:Pneumatic pin nailer
- Gauge:23
- Fastener lengths:5/8, 3/4, 1, 1-3/16, and 1-3/8 in.
- Weight:2.0 lbs
- Trigger:Dual trigger
- Warranty:5-year professional tool warranty
Our verdict“Choose the NP35A if low weight and careful pneumatic fastening matter more than cordless mobility or longer pin capacity.”
How We Picked
I ranked these pin nailers by the factors that change the workday: pin-length capacity, power-source convenience, handling, and readiness out of the box. I gave extra weight to useful range and a clear fit for common finish tasks, while also looking at whether a model depends on a compressor or a separate battery purchase. A cordless tool can be the better choice for room-to-room trim work, but a pneumatic model may suit a fixed workshop and an existing compressor better.
The ranking separates tools with distinct advantages rather than treating every 23-gauge model as interchangeable. The DEWALT DWFP2350K ranks first for its stated 2-inch capacity; the ATOMIC kit earns a strong cordless position because its battery and charger are included; and the Metabo HPT NP35A offers a pneumatic alternative. I treat repeated KEENTECH and EASEWORK product names as listing variants, not proof of separate tool designs, and advise checking each listing for exact contents and specifications before choosing.
Factors to Consider When Choosing Pin Nailer
A 23-gauge pin nailer is a detail tool, so the right choice depends less on headline power and more on the kind of work, setup, and finish you need. I would decide on these broader factors before settling on a model.
Match Pin Length to the Material
Pin length affects how securely parts stay together while adhesive cures and how easily a fastener can pass through the workpiece. A longer pin can help with thicker trim or layered assemblies, but it is not automatically better: a pin that exits the far side can damage the finish or create a safety risk. Check the tool’s stated range against the thickness of both pieces, not just the face material. Also confirm that the pin lengths you buy are compatible with the nailer. If most of your jobs involve delicate, thin trim, a shorter range may be enough and can keep the tool choice simple.
Choose Air or Cordless Around Your Work Setup
Pneumatic nailers rely on a compressor, hose, and suitable fittings; cordless models trade that air setup for a battery and charger. An existing compressor makes pneumatic tools appealing for a dedicated shop, especially when several air tools share the same setup. For work across rooms, ladders, or locations without power, cordless handling can save setup time and avoid a hose catching on finished surfaces. The common mistake is comparing tool-only cordless models with complete kits as if they are equally ready to use. Include the battery platform, charger, compressor, hose, and fittings you still need when judging the true convenience of each option.
Think About the Visible Finish and Workholding
Pin nails leave small holes, but a small hole is not the same as a guaranteed invisible finish. Wood species, grain, paint, stain, and the viewing angle all affect how noticeable a fastener becomes. On fragile or narrow stock, test on scrap to check for splitting, surface marks, and whether the pin holds the pieces in alignment. Pins often work best as temporary clamps while glue sets, rather than as the only support for a joint that must carry substantial load. Avoid choosing a nailer solely because it uses fine-gauge fasteners; the joint design and adhesive still determine the assembly’s strength.
Prioritize Access and Balance for Repetitive Detail Work
For crown details, cabinet trim, and small molding, the tool’s nose shape and overall balance can matter as much as its firing mechanism. A compact body may fit into narrow spaces, while a heavier cordless model can feel tiring during repeated overhead work. Think about where your hand and the tool must sit to keep the nose square against the material. If possible, compare the tool dimensions and grip layout with the tightest space you expect to reach. Buyers often focus on the smallest body but overlook visibility at the nose, which can make accurate placement harder.
Check Maintenance, Parts, and Consumables
Pneumatic tools may need routine air-system care and occasional lubrication, depending on the maker’s instructions; cordless tools avoid compressor maintenance but still rely on battery condition and charging. Before buying, check the manual for recommended care, jam-clearing steps, and service support. Confirm pin availability in the lengths and finish you need, since an unusual size can interrupt a project even when the tool is ready. Bundled pins can help you get started, but they should not outweigh fit, capacity, or a dependable supply of compatible fasteners. Keep the nose clean and follow the maker’s loading and clearing instructions to reduce feeding problems.
Compare the Complete Setup, Not Just the Tool
A tool-only listing may be a sound choice when you already own the matching battery, compressor, or accessories, but it can be a poor fit for a first-time buyer. Check exactly what the package includes: battery, charger, case, fittings, and pin assortment can vary. The repeated KEENTECH and EASEWORK names in this roundup make listing-level checks especially useful; similar titles do not confirm identical packages. Look at the model number and product specifications rather than relying on a short listing title. Paying more for a ready-to-work kit makes sense when it saves a separate purchase, while an existing compatible setup may make a bare tool the simpler route.
Frequently Asked Questions
Should I choose a pneumatic or cordless pin nailer?
Choose pneumatic if you already have a compressor and mainly work in a shop or near an air supply; it lets you use the existing setup instead of adding another battery platform. Cordless is more convenient when you move around a jobsite, work above shoulder height, or want to avoid a hose around finished surfaces. Check whether the cordless listing includes a battery and charger, since some models are tool-only. If you own compatible batteries already, that requirement may not be a drawback. If you do not, compare the full setup needed for each option before deciding.
Is a 2-inch pin capacity worth prioritizing?
It can be useful when you regularly fasten thicker trim or need a longer pin to hold layered pieces while glue cures. For thin decorative work, long pins may add little benefit and can increase the chance of a pin breaking through the back or splitting delicate stock. Match the length to the combined material thickness and test on scrap when the finish matters. The DEWALT DWFP2350K is the standout in this lineup for stated reach, while the PORTER-CABLE PIN138 has a shorter maximum. Choose the longer range for a real job need, not simply as a higher number on a specification sheet.
Can a pin nailer replace a brad nailer for trim?
Usually not as a direct replacement. A 23-gauge pin leaves a small mark and is useful for delicate trim or holding pieces in place while adhesive sets, but it has less holding power than a larger brad fastener. For pieces that need mechanical support, a brad nailer or another fastening method may be more suitable. Many finish projects use both tools for different parts of the job. Choose based on joint strength and material, not just the preference for a smaller hole.
What should I verify when multiple listings use the same product name?
Compare the exact model number, included accessories, nail quantity, and stated pin-length range. In this roundup, KEENTECH and EASEWORK names recur, so repeated titles alone do not establish that the listings are different tool versions. Check whether the package includes pins or only the nailer, and confirm any claimed features in the manufacturer details. If the specifications match, treat the entries as possible listing duplicates rather than assuming one tool has an advantage. This reduces the chance of choosing based on bundle wording instead of the tool itself.
Should I buy a bare tool or a kit?
A bare tool is usually the more practical fit when you already own batteries from the same platform and have the charger needed for that model. A kit is a better starting point when it includes the battery and charger you need to begin working, as with the listed DEWALT ATOMIC kit. Check what is actually in the box because package contents can differ even when product names are similar. For pneumatic models, think of compressor, hose, fittings, and pins as part of the setup rather than assuming the nailer alone is ready to use. Choose the package that fills a real gap in your shop, not one that duplicates equipment you own.
Conclusion
For most buyers seeking a balanced pneumatic option with extra pin-length range, I recommend the DEWALT DWFP2350K as best overall. The best cordless pick for a ready-to-use kit is the DEWALT ATOMIC DCN623D1, while the ATOMIC bare tool or RYOBI ONE+ makes more sense if you already own the matching battery platform. For a pneumatic alternative, consider the Metabo HPT NP35A; buyers with an existing compressor can also compare the Arrow, PORTER-CABLE, KEENTECH, and EASEWORK options by exact specifications and package contents. Beginners should favor a kit with the power source and charger included, rather than a bare tool that needs extra purchases. If your work is mostly delicate trim, prioritize easy access and appropriate short pins; if you need more reach, the DWFP2350K’s stated 2-inch capacity is the clearest match in this lineup.
